Timeline

* test(conformance): repository-state conformance suite (#262)

Check go-libfossil against draft-fossil-repo-state-00, requirement by requirement. Each derived-state case is a scripted sequence of artifacts loaded into go-libfossil and into fossil(1); the tables derived from it are compared row by row, joined by artifact hash. Every case runs through manifest.Crosslink, as one sweep and one artifact at a time, and most also run as a ".rebuild" case through verify.Rebuild. fossil's rows must equal each expectation on every run, and each case states what ignoring its requirement would change, so a case cannot pass or fail by accident.

API cases cover name resolution, leaves, the ambiguity test, branch creation and listing, and tagging, each compared with fossil's answer on the same repository. TestRepoStateCorpus compares verify.Rebuild and a Crosslink sweep with fossil rebuild on real repositories named by CONFORMANCE_REPOS.

Known failures are marked with the placeholder Gap #0 until their issues are filed, so TestCoverage refuses them for now.

* test(conformance): repository-state suite review fixes (#262)

- Unsorted T-card cases use a non-hex name, so the ordering rule, not the hex-name rule, is what rejects them. - RS-4.2-7 crosslinks every artifact a second time over the rows the first left (repostate.4.2.relink-unchanged), instead of a sweep that links nothing. - RS-7.3-2, -3 and -4 are checked through manifest.Checkin and branch.Create, which maintain leaves one check-in at a time; a crosslink sweep recomputes the whole table. - retag-branch is built so the retagged check-in's own leaf status changes; branch membership is read through BranchLeaves, and the tagxref case it replaced is reattributed to RS-5.4-5; bad-prefix also compares tagxref. - parentless-untagged follows the draft and marks go-libfossil's crosslink, which follows fossil(1), as a deviation; the unused draft field becomes fossil, checked against fossil's rows. - Every fossil(1) command, in all suites, runs with HOME, FOSSIL_HOME and XDG_CONFIG_HOME in the test's directory, so it no longer records checkouts in the user's global configuration.

* test(conformance): mark repository-state gaps with their issues (#262)

Replace the placeholder gap marks with the issues that track each fix: #278 and #285-#294. check-in: 7fa0b9b5da user: [email protected] tags: trunk

* fix(xfer): reject non-decimal card sizes and bound payload memory

A payload card's size was parsed with strconv.Atoi, so a peer sending `file HASH -1` reached readPayload's negative-size assertion and panicked the client or server decoding the message, and a signed size such as `+5` was accepted. Sizes now go through parseSize, which follows the sync draft's `decimal = 1*DIGIT` grammar and fossil's 32-bit limit and returns a decoding error for anything else. uvfile FLAGS use the same parser, so negative FLAGS are rejected as the draft requires. The assertion stays, now unreachable from peer input.

readPayload no longer allocates the declared size up front: its buffer grows with the bytes read, so a large size over a short message fails after allocating about what was sent.

A cfile payload may inflate only to its USIZE (a margin above it for a delta) and not past its 4-byte size prefix, and all cfile payloads in one message share a MaxCFileInflateBytes (1 GiB) budget, so a few megabytes of zlib cannot inflate to tens of gigabytes.

FuzzDecode exercises the decoder over both framings.

* fix(sync): refuse malformed xrow payloads and cap HTTP reply bodies

An xrow payload or xdelete PKData from a peer was decoded into a map and used as is. JSON null gave a nil map that reached coerceJSONNumbers' assertion, and a primary-key value of the wrong type or a nested value reached normalizeValue's, panicking the client or server. Both directions now decode through decodeRowJSON: one JSON object, nothing after it, and repo.ValidateRow's rules, which require scalar values and primary-key values that PKHash can normalize. A client refuses an xrow for a table it has not registered. Column types match case-insensitively, as table creation accepts them.

Both HTTP transports read replies through xfer.ReadBody, which stops at MaxBodyBytes (MaxDecompressedBytes plus framing headroom) and returns ErrBodyTooLarge, untagged for retry, instead of reading an endless body into memory.

FuzzTableSyncPayload drives the server handler and client over arbitrary payloads.

* fix(sync): check synced-table rows and identifiers before building SQL

repo.UpsertXRow wrote a row's map keys into its INSERT as column names, and the rows of an xrow payload or xdelete PKData come from the peer, so a key such as "val, mtime) VALUES(...) --" chose the statement's columns and values, and a key could select from other tables into a synced one. This held on the server for pushed rows and tombstones, and on the client for a server's rows.

A peer's row must now use exactly the table's declared columns: repo.ValidateRow refuses any other key, which also keeps a peer from setting _owner. UpsertXRow no longer trusts its caller: it reads the table's registered schema and refuses any key it does not declare, apart from _owner on an ownership-mode table. ListXRows, LookupXRowOwner and DeleteXRowByPKHash validate the table name and the column names they interpolate, so no synced-table identifier reaches SQL text unchecked.

* fix(sync): answer reqconfig only with fossil's transferable config

The sync server answered reqconfig NAME with any row of the config table, for any requester, including one with no capabilities, so project-code, server-code and every local setting could be read by anyone who could reach the sync endpoint.

handleReqConfig now follows fossil's page_xfer and configure.c. It answers only a /GROUP name, only for a requester with Read, matches the group by prefix in fossil's table order, and sends only the names fossil transfers in that group, in fossil's encoding. The user and subscriber tables also need Admin, which counts only for a verified login, and the concealed table needs RdAddr. A refused request gets no cards and no error.

The groups, their names and their capability rules live in one place, config_groups.go. A differential test answers the same requests with fossil's own server and with HandleSync on the same repository and requires identical config cards.

* test(sync): keep fossil http from leaving a backoffice process

* fix(sync): check the login nonce against the request body

The server verified a login card's signature over its nonce but never checked that the nonce was the SHA-1 of the request body after the login line, as fossil's check_tail_hash does (draft-fossil-sync-protocol-00 §6.2). A login card captured from one request therefore authenticated any other request body.

The decoder now records, for each login card, the SHA-1 of the decompressed bytes after the card's line, and VerifyLogin refuses a card whose nonce does not match it. A login card that was never decoded has no tail and is refused.

Login handling otherwise follows fossil's page_xfer and check_login: - a refused login ends the exchange with "error login failed" instead of continuing as nobody; - a second login card is refused with "multiple login cards"; - a successful login adds the user's capabilities to nobody's instead of replacing them; - nobody and anonymous log in without a password, and the reserved developer and reader logins and accounts with an empty password cannot be logged into.

Fixes GHSA-2g5p-q5f3-477p.

* fix(repo): seed nobody with fossil's default capabilities

A new repository seeded the nobody user with "cghijknorswy", so every request without a login card could push check-ins and unversioned files, write wiki pages and tickets, and held Setup. Seed the four built-in users `fossil new` creates, with fossil's capabilities: nobody "gjorz", anonymous "hz", developer "ei" and reader "kptw".

Setup and Admin now include check-in, read and clone, as they do in fossil, so the creating user can sync once given a password. A login to an account with no stored password is refused, as fossil's check_login refuses it; the creator starts with none, and the signature would otherwise be the SHA-1 of the nonce alone.

Tests that push without credentials grant nobody push explicitly. Existing repositories keep their stored capabilities.

* test(auth): reserved-login test updates the seeded developer and reader rows

New repositories now seed developer and reader as fossil does, so the test gives the existing rows a password instead of inserting them.

* docs(changelog): group the sync hardening fixes under Security

* test(sync): reqconfig tests sign their logins over the request body

The login nonce now has to cover the request body, so the reqconfig tests build their admin requests with signedRequest instead of a bare login card. check-in: 3a6126c3e9 user: [email protected] tags: trunk